If you are tired of wires, this wireless pressure transmitter is your solution. Used in conjunction with a receiver, this transmitter eliminates the need for hard-wiring in tough industrial and process applications. It can be installed in areas not easily accessible allowing the operator to monitor measurements efficiently and safely. Featuring robust construction and Silicon-on-Sapphire sensor technology, this transmitter will ensure outstanding and reliable performance.

Accuracy NHLR: ≤ ±0.3 % of span BFSL
Electrical Connection: Screw terminals for conductor sizes 0.2 – 2.0 mm2 are located beneath the screw lid. Cable entry to head is through an IP68
cable gland with compression seal for cable sizes 4 – 8 mm. Optional M20 Conduit fitting is available.
Output Signal: Radio Transmission
Power Supply: Replaceable 3.2 Vdc (1/2AA) Lithium Thionyl Chloride battery or 8 – 30 Vdc supply
Protection: Protected against supply voltage reversal up to 50V (amplified versions)
Wireless Receiver: RX9500 radio receiver station (contact sales team for more information)
Transmission Range: Point-to-point radio transmission up to 500m line-of-sight
Data Transmission Rate: Serial radio packet at 4800/9600 baud (up to 4 samples per second)
*Pressure Connection*:1/4” NPT or BSP male (G1/2);
Pressure Ranges: 0-30 in Hg; 0-7.5 psi; 0-15 psi; 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-10,000 psi; 0-20,000 psi (other options available)
Material: 304 or 316 Stainless Steel Body
Wetted Parts: Titanium Alloy and SAE 316 Stainless Steel
Sensor: Silicon-on-Sapphire Technology

ATEX/IECEx options available (Including M1 for mining applications). CE compliant.