Low Pressure

Our low pressure transmitters are designed for very low pressure applications, with operating ranges as low as 0-0.75 psi. These sensors maintain a high level of performance while providing low hysteresis and excellent long term stability.

Accuracy NHLR:≤ ±0.5%  of span BFSL; ≤ ±0.6 % of span BFSL
Electrical Connection:Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry; 90° Angle Standard Connector / DIN 175301-803(A). 90° Angle Mini Connector / DIN 17530-803© Shielded Cable (3 feet standard) (other options available)
Output Signal: 10 mV/V typical (4 wire), 0-5 V (4 or 3 wire), 0-10 V (4 or 3 wire), 4-20 mA (2 wire)
Supply Voltage: 10 VDC, 13-30 VDC, 13-30 VDC, 10-36 VDC
Protection: Protected against supply voltage reversal up to 50V (amplified versions) Protected against reverse polarity and short circuits.
Pressure Connection: 1/4” NPT or BSP male (G1/4); 1/2” NPT or BSP male (G1/2); (other options available)
Pressure Ranges: 0-0.75 psi; 0-1.5 psi; 0-3 psi; 0-4 psi; 0-5 psi; 0-6 psi; 0-7.5 psi; 0-10 psi; 0-15 psi (other ranges available);
Material: 304 or 316 Stainless Steel Body;
Wetted Parts: SAE 316 stainless steel, Nitrile NBR O-ring, silicon diaphragm, glass filled polyamide; 304 Stainless Steel, Silicon Chip, Glass
Sensor: Piezoresistive Silicon or Isolated Piezoresistive Silicon; Thin film resistors on silicone membrane.