High Temperature

Designed using high quality materials, this range of transmitters feature robust construction that permits accurate measurements at elevated temperatures of up to 250°C.

Accuracy NHLR:±0.25% or ±0.35% of span BFSL, ±0.1% is available
Electrical Connection:DIN EN175301 plug and socket, Cable outlet 1m screened, M12 connector, Cable outlet 1m screened IP67 protection;90° Angle Standard Connector / DIN 175301-803 (A). 90° Angle Mini Connector / DIN 17530-803 © Shielded Cable (3 feet standard)
Output Signal: 4 – 20 mA (2 wire), 0 – 5 V (4 wire), 0 – 10 V (3 or 4 wire);
Supply Voltage: 13 – 36 VDC, 13 – 30 VDC, 13 – 30 VDC;
*Protection: Protected against supply voltage reversal up to 50V; Protected against reverse polarity and short circuits.
Operating Ambient Temperature: -20 °C to +85 °C (-4 °F to +185°F); -40°C to +105°C (-40°F to +221°F)
Operating Media Temperature: 0°C to +205°C (+32°F to 185°F) with standard o-ring ; 0°C to +250°C (+32 °F to +482 °F) with optional o-ring; -40°C to +160°C (-40°F to +320°F)
Pressure Connection: 1/2” BSP male (G1/2) with standard integral viton (FKM) o-ring seal and flush SAE 316L stainless steel diaphragm.
O-ring seal is for service temperature up to max. 205°C. An alternative o-ring material can be provided for service up to 250°C; 1/4” or 1/2” NPT Male
Pressure Ranges: 0-150 psi; 0-300 psi; 0-1,500 psi; 0-3,000 psi; 0-6,000 psi; 30“Hg to 0 thru 0-15,000 psi.
Material: 304 or 316 Stainless Steel Body;
Wetted Parts: SAE 316L stainless steel; 17-4 PH Stainless Steel
Sensor: Ceramic Thick Film; Thin Film Resistors directly deposited on stainless steel diaphragm.