General Purpose

These general purpose transmitters are designed specifically for applications where economical price and reliable pressure measurements are required. Incorporation of bonded strain gauge technology and unique manufacturing techniques results in a low cost, high quality transmitter ready for a wide array of applications.

Accuracy NHLR: ±0.10%,  ±0.25 %, &  ±1.00 % of span BFSL options available
Electrical Connection: Mating socket EN175301-803 Form A (ex DIN43650) rated IP65 with PG9 cable entry; Mating micro DIN socket EN175301-803 Form C (ex DIN43650), a screw terminal connector rated IP65; 90° Angle Standard  Connector / DIN 175301-803 (A), Shielded Cable (3ft standard); Other options are available.
Output Signal: 4-20 mA (2 wire), 0-10 mV/V (4 wire), 0-5 V (4 or 3 wire), 0-10 V (4 or 3 wire), 2 mV/V typical (4 wire);
Supply Voltage: 10-36 VDC, 10 VDC (5-15V), 13-30 VDC, 13-36 VDC,
Protection: Protected against supply voltage reversal up to 50V (amplified versions) Protected against reverse polarity and short circuits.
Pressure Connection: 1/4” NPT & BSP male (G1/4);  1/2” NPT & BSP male (G1/2); and 1/4” HPF High Pressure Female.

Pressure Ranges: 0-30 in Hg (Vacuum) up to 100,000 psi
Material: 304 or 316 Stainless Steel Body;
Wetted Parts: Titanium Alloy, 316 or 17-4PH Stainless Steel. Ceramic diaphragm for lower ranges.
Sensor: Silicon-on-Sapphire Technology; Thin film resistors directly deposited on Stainless Steel Body

ATEX/IECEx option available (include M1 for mining applications). CE compliant.