Flush Diaphragm Pressure

These pressure transmitters are designed for applications where direct contact with the measurable media must be avoided. Featuring robust stainless steel construction and the latest strain gauge technology, these sensors boasts excellent accuracy and stability over a long service life.The flush diaphragm is easily cleanable to ensure long term durability and performance.  Applications for these include but are not limited to food processing, pharmaceutical, petrochemical, waste water and slurry handling.

Accuracy NHLR:≤ ±0.30% of span BFSL; ≤ ±0.35 % of span BFSL
Electrical Connection: Mating socket EN175301-803 Form A (ex DIN43650), a screw terminal connector rated IP65 with PG9 cable entry; 90° Standard Connector / DIN 175301-803 (A) Shielded Cable (3 ft standard).
*Output Signal*:4-20 mA (2 wire), 0-5 V (4 wire), 0-10 V (4 wire)
Supply Voltage: 13 -36 VDC, 13-30 VDC; 0-10 VDC
Protection: Protected against supply voltage reversal up to 50V; Protected against reverse polarity and short circuits.
Operating Ambient Temperature: -20°C to +85°C (-4°F to +185°F); -20°C to +85°C (-4°F to +185°F)
Operating Media Temperature: -20°C to +85°C (-4°F to +185°F); -20°C to +125°C (-4°F to +257°F)
Pressure Connection: 1/2” NPT or BSP male with standard integral Viton o-ring seal and flush SAE 316L stainless steel diaphragm; G 1/2 A, G 3/4 A, G 1 A Type E; Other options available
Pressure Ranges: 0-30 in Hg, 0-1.5psi, 0-15 psi, 0-30 psi, 0-60 psi, 0-100 psi, 0-150 psi, 0-200 psi, 0-300 psi, 0-600 psi, 0-800 psi, 0-1,500 psi, 0-3,000 psi, 0-6,000 psi (other ranges available);
Material: 304 or 316 Stainless Steel Body;
Wetted Parts: SAE 316 stainless steel, Nitrile NBR O-ring
Sensor: Bonded Foil Strain Gauge; Ceramic Thick Film or Isolated Piezoresistive Silicon; Capsule type – thin film resistors on a Silicon Membrane, Oil Filled, Stainless Steel Diaphragm